This apparatus is designed for work in stationary conditions in X-ray laboratories and protection cabinets. They are used for classic radiography, X-ray real time TV system and in industrial tomography.

Three modifications with different types of X-ray tubes with different focal spot sizes and, accordingly, different anode power at the X-ray tube:

At all three X-ray tubes anode target is reflective type, with tungsten and radiation filtration with 2 mm aluminum equivalent. 

The working radiation diagram is conical with angles at the vertex 60°x 40°.

In agreement with the customer, it is possible to create a narrowed diagram by putting a special collimator joint on the X-ray unit body.

The apparatus can operate at full anode power continiously. X-ray unit is cooled with forced air flow. The X-ray unit can operate in any position.

The apparatus can be controlled in two different modes:

✔From the Remote Control Block with cable;

✔From interface RS-485.

This apparatus provides a high stability of output radiation, so it can be used in X-ray television systems and industrial tomographs. In this case, the apparatus is used with control from the RS 485 interface. The Power and Control Block has a connector for connecting an external lock of protection cabinet door.

Operating temperature range of the system     0℃ + 40℃

X-ray Unit dimensions                                780 x 190 x 150 mm

X-ray Unit weight                                                 10.8 kg

Power and Control Block dimensions          280 x 260 x 160 mm

Power and Control Block weight                           5.5 kg

Remote Control Block dimensions            155 x 100 x 30 mm    

Remote Control Block weight                               0.4 kg

Power supply from AC main                 100 ÷ 240 V 50 ÷ 60 HZ