ZY-320HP high frequency x ray generator is newly design and produced by ZHONG YI NDT CO ,LTD.
It adopt special transformer system, advanced operation system without assembling high voltage coil inside to achieve lower working heat radiation and lower failure rate.
Setting adjustable tube current(1-3mA) for improving film definition and sensitivity.
New produced lighter generator and 8mm connecting cable for easy carry and moving at working site,meanwhile it has continuous exposure function with 100% working period,Max. penetration 80mm.
It has strong anti-interference function based on the working voltage between 180V to 260V.
Constant voltage, it can be connected with DR static imaging system directly.
Power-on Time Delay Function: 0.0-9.9 min.
Automatic Training Function: extend equipment working life.
Protection Function: LA(No mA), HA(over mA), PU(over voltage), LU(lower voltage) and PT(over temperature) warning.
Self -Protection Function.
Equipped with key switch, to avoid exposure accidentally.
Exposure time delay function.
Parameter
Model | ZY-320HP | |
Tube Classify | Directional Ceramic Tube | |
Tube Current | Adjustable 1-3 mA | |
Beam Angle | 40° | |
Focus Size | 2.5×2.5 mm | |
Tube Voltage | 220-320 KV | |
Power Supply | AC180V~260V, 50HZ | |
Capacity (KW) | >2.5 | |
Max. Penetration A3 Steel | 80 mm | |
X-ray Generator | Size | 320×320×780 mm |
Weight | 31 kg | |
Controller | Size | 430×440×200 mm ( L*W*H) |
Weight | 11kg | |
Insulating Material | SF6 gas | |
Working Temperature | -25°~ +40° | |
Relative Humidity | ≤85% | |
Reference Condition | 1.Focus:600mm | |
Safe Working Pressure of | 0.35-0.50 MPa |
List
| Item | No. |
1 | ZY-320HP X Ray Generator | 1 |
2 | X Ray Controller | 1 |
3 | 10 Cores Signal Connecting Cable | 1 |
4 | 2 Cores Power Cable | 1 |
5 | Earth Wire | 1 |
6 | Accessory Kit | 1 |
7 | Testing Report & Certification | 1 |
8 | Operation Manual | 1 |