NDT Equipment

Ultrasonic Thickness Gauge

2018-04-20

Ultrasonic Thickness Gauge.jpg


Thickness Gauge MT160


• Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials.
• Transducer models are available for special application, including for coarse grain material and high temperature applications.
• Two-Point Calibration function.
• Two work modes: Single point mode and Scan mode.
• Coupling status indicator showing the coupling status.
• Optional software to process the memory data on the PC.
• Optional thermal mini-printer to print the measured data via RS232 port.


Specifications
• Display:4.5 digits LCD with EL backlight.
• Measuring Range:0.75~300mm (in Steel).
• Sound Velocity Range: 1000~9999 m/s.
• MT160: 0.1/0.01mm  
• Accuracy: ±(0.5%Thickness+0.04)mm, depends on materials and conditions
• Units: Metric/Imperial unit selectable.
• Four measurements readings per second for single point measurement, and ten per second for Scan Mode.
• Memory for up to 20 files (up to 99 values for each file) of stored values.
• Power Source:Two “AA” size, 1.5 Volt alkaline batteries. 100 hours typical operating time (EL backlight off).
• Communication:RS232 serial port.
• Outline dimensions:150×74×32 mm. Weight:245g






TT100 Digital Ultrasonic Thickness Gauge


image001.pngimage003.png


Features
• Portable size and easy operation
• Suitable for any metallic and non-metallic materials ultrasonic can go through
• Self-compensating of nonlinearity function is supplied for correction of pickup nonlinearity
• 10 measuring values can be recorded for TT100
• optional 2.5MHz, 5MHz and 7MHz transducers are available
• Clear 4-Digit LCD display with backlight
• 5 pre-set sound velocities for repeating applications
• mm / inch selectable
• TT100,TT130 and TT140 are suitable for thickness testing of various materials with sound speed range 1000-9999m/s


Specifications

 

TT100

TT110

TT120

TT130

TT140

Measuring range

0.75 – 300.00mm (steel)

Measuring range for steel pipes

Min.3.0mm thickness ×Φ20 diameter

Diameter of transducer

Φ10 (standard) Φ6 (optional) Φ12(optional)

Display resolution

0.1mm

0.01mm

0.1mm

Calibration

4.0mm steel base plate integrated

Tolerance

±(1%H+0.1) mm (H means the thickness of tested piece)

Measuring units

mm/inch

Sound velocity range

1000-9999m/s

5900 m/s

1000-9999m/s

1000-9999m/s

Display

4-Digital LCD

4-Digital LCD with backlight

Surface temperature

-10°C to +60°C

-10°C to +300°C

-10°C to +60°C

-10°C to +60°C

Battery indicator

Low battery voltage indicator

Power supply

2 Pcs. AA batteries 1.5V

Operation time

250 hours

Dimensions

126mm×68mm×23mm

118mm×67mm×28mm

Weight

Approx.250    including batteries

 

CONTACT US

E-mail: zhongyi@zhongyi-ndt.com

Tel: +86- 415-6135926

Fax : +86- 415-6133688

Work Time: 9AM--5PM (GMT+8)

Address: No. 5 Tong Xing Rd ,Zhen An Distr.

Dandong, 118011 China

MOBILE WEBSITE
Scan the QR code below