NDT Equipment

Magnetic Particle Detector

2018-04-20

Magnetic Particle Detector.jpg


310DC  Magnetic Yoke  Detector


001.jpg

 
310DC AC/DC magnetic yoke detector/ magnaflux yoke inspection uses battery or ac220V directly supply power. Because of its small volume, light weight, especially suitable for magnetic powder flaw of high and narrow field.

Power supplied by 12V. 7.5 Amp. Hr batteries,artesian pulse circuit board installed inside of magnetic yoke detector. This circuit provides a very high speed of pulsed DC magnetic field, similar with AC.
The DC through magnetic poles can be applied to be the workpiece surface, made a testing debugging intensive DC magnetic field, and detect the surface and near surface defects and detect lesser discontinuous state defects.
 
Note:DC power supply, namely it is impossible to get the same sensitivity for small surface defects detection under the circumstances AC magnetic field.Therefore, should use calibration sensitivity in order to detect the smallest defects detection.
 
310DC meets all the requirements industrial standard on DC magnetic yoke lifting force test, lifting force is 32 kg. Lifting force discontinuities detection ought to be testing process.AC 220V dc power supply, AC220V power grounding lines should good grounding, in order to ensure the security of person. AC lifting force is 7 kg.


Probe weight3.5kg
Inter polar distance0-206mm
Lifting powerAC 7kg(>15.pounds),DC 32kg(>70.pounds)
Power supply voltageDC12V, AC220V
Frequency50Hz
Charging time8-12 hours

List

Magnetic yoke probe1 only
Ac lines AC 220V1 root
Packing box1 only
Instruction for use1 copy
Warranty card1 portion
certificate1 copy
Fuse(3A)5 only


LKCD-III Magnetic Particle Equipment


image001.png


Features
1. LKCD-III magnetic yoke detector/ magnaflux yoke inspection uses battery or AC 220V directly supply power. Because of its small volume, light weight, especially suitable for magnetic powder flaw of high and narrow field.
2. Power supplied by the 12V. 7.5 Amp.  
3. Powered by 12V/DC battery, artesian pulse circuit board installed inside of magnetic yoke detector. This circuit provides a very high speed of pulsed DC magnetic field, similar with AC.
The DC through magnetic poles can be applied to be the workpiece surface, made a testing debugging intensive DC magnetic field, and detect the surface and near surface defects and detect lesser discontinuous state defects.

Technical Specification

Probe weight3.5kg
Inter polar distance0-206mm
Lifting powerAC 7kg(>15.pounds),DC 32kg(>70.pounds)
Power supply voltageDC12V, AC220V
Frequency50Hz
Charging time8-12 hours


Accessories

Magnetic yoke probe

(A/D/E/O)

1 only
Ac lines AC 220V1 root
Packing box1 only
Instruction for use1 copy
Warranty card1 portion
certificate1 copy
Fuse(3A)5 only

Note:
LKCD-III meets all the requirements industrial standard on DC magnetic yoke lifting force test, lifting force is 32 kg. Lifting force discontinuities detection ought to be in testing process.
Can use AC 220V dc power supply, but AC220V power grounding lines should be good grounding, in order to ensure the security of person. AC lifting force is 7 kg.

CONTACT US

E-mail: zhongyi@zhongyi-ndt.com

Tel: +86- 415-6135926

Fax : +86- 415-6133688

Work Time: 9AM--5PM (GMT+8)

Address: No. 5 Tong Xing Rd ,Zhen An Distr.

Dandong, 118011 China

MOBILE WEBSITE
Scan the QR code below