Micro Video Control Pipeline Crawler

ZY-4 Micro Video Control Pipeline Crawler

2018-04-20

c8.jpg


Micro-Wave Video X Ray Pipeline Crawler is used for check pipeline welding joint through micro-video system work with DC x ray unit which powered by battery pack on the pipeline crawler. Pipeline Crawler running in a wall or pipeline; detect internal defects and flaws through radiography technology, move steadily inside the pipe with speed of up to 18m/min and distance up to 5 kilometers .


Features:
1. Absolute Guarantee  Operator Safety
 ● Positioning by wireless microwave video instead of original isotope positioning.
 ● The generator voltage can be adjusted according to different  conditions, in  order to meet the testing needs.
2. Available for Different Diameter Pipeline
 ● Applying different pipeline diameters; forward speed 18m/min.
3. Accurate Positioning
 ● Adopts advanced PLC control system to achieve more precise positioning.
 ● Real-time continuous show the pipe inner situation.e.g.: NDT Equipment fault, battery State LOW, over tempered inner pipeline, distance to the pipe mouth.
4. Reliable Energy Supply
 ● Electronic speed control motor function, to achieve constant torque, constant current operation.
 ● Automatic inspect the energy .
5. Ensure the Film Density
  ● X Ray Unit has regulatory function of KV with large diameter and thick walled tube has the regulatory function. Tran-illumination to ensure the X-ray film and degree of consensus.
6. Full Set Security Protection
  ● Real-time function to protect the x ray unit from meeting water, over voltage, over current, x ray unit falling off, over temperature.    
  ● Automatic stop function, with no need of Real -time monitoring.
  ●  High quality sealed lead acid battery for prevent.
  ●  Inspect the energy automatically, crawler will turn back in time when energy is lacking, so that to prevent losing the crawler in the pipeline.



Model

ZY-4

Locating  System

Micro-Wave Video Control

Available Diameter

8.6"~14"

Crawler Weight

30 kg

Lead acid battery

7Ah

Battery Weight

28 kg

Turning Radius

≥10D

Speed

18 m/min

Positioning Precision

±3 mm

Max Climbing Slope

30°

Operate Temperature

-20℃~+75℃

Available Humidity

≤90%

Drive  Mode

Two Wheels Driven

Moving Distance

5 km (Round Trip)

X RAY UNIT

Model

XXHA-1005

XXHA-1605

Max Penetration A3 steel

8 mm

15 mm

Generator Dimension

170×870 mm

195×800 mm

Generator Weight

13.5 kg

15 kg

Radiation Angle

360° × 40°

Exposure Time

0-5 min

Anode Target

Cone target

Available Humidity

≤90%


List

No.

Item

Quantity

1

Pipeline Crawler

1

2

Micro-Wave Video Controller

1

3

X Ray Unit

1

4

Battery Pack

1

5

Battery Pack Charger

1

6

Video Transmission System

1

7

Bracket Plate

2

8

Sliding Plate

2

9

Extend Shaft

1

10

Connecting Cable

1

11

Power Cable

1

12

Operation Manual

1

 

CONTACT US

E-mail: zhongyi@zhongyi-ndt.com

Tel: +86- 415-6135926

Fax : +86- 415-6133688

Work Time: 9AM--5PM (GMT+8)

Address: No. 5 Tong Xing Rd ,Zhen An Distr.

Dandong, 118011 China

MOBILE WEBSITE
Scan the QR code below