Z-125W UV lamp is mainly used for fluorescent magnetic particle detection and fluorescent penetration detection in non-destructive testing, as well as verification of fluorescent patterns on printed materials and postal products and criminal investigations where ultraviolet light sources are required. The UV lamp is light and easy to operate by hand. It adopts imported long-life UV bulb or domestic bulb.

Main specifications:

1. Ultraviolet bulb: 125W E27 screw port with external ballast

2. Power supply voltage; single-phase AC 220V 50HZ

3. Working current / starting current: 1.2A / 1.8A

4. Warm-up time: 3 minutes

5. It takes 5 minutes to delay re-lighting

6. Output wavelength: 365 nm

7. Power consumption: 125W

8. The distance between the surface of the bulb and the surface of the illuminated object: about 38cm

9. Weight of hand-held lampshade: 1.5 kg

10. Controller weight: 3.5 kg

11. Controller size: 250mm × 160mm × 110mm

List

Precautions for use:

1. The UV lamp is only for use in dark places. In the presence of visible light, its effectiveness will be reduced or ineffective.

2. The quality of the power supply voltage should meet the requirements. If it suddenly drops by more than 5%, it may cause the bulb to extinguish itself.

3. When the power supply is interrupted, after the light bulb is turned off, it generally needs to be interrupted for 5-10 minutes, and it can be restarted after the bulb is cooled.

4. Do not place the lamp holder on a vibrating table. If hanging, use flexible slings.

5. The lamp holder should be handled gently to prevent falling. After the bulb is broken, it should be properly handled in time to prevent mercury damage.